Fault and eliminating methods for paper tube machine
Fault and eliminating methods for paper tube machine
this time we continue to describe the normal fault and eliminating methods for paper tube
machine.
fault 1,There exists slip phenomenon between drive belt and the paper tube.
reason one,paper tube machine's drive belt tension is not enough. resolve method,adjust
hand wheel drive nose to increase the belt tightening force.
reason two,the belt is too old or poor quality. eliminating method,change the belt.
fault 2,paper tube stuck in the axis, the normal reason for this phenomenon is fixed axis
has binder.the resolve method is clean the binder with damp cloth.
fault 3,winding of paper with a deviation off phenomenon.
reason 1,improper pressure on the paper tape, resolve method,Adjust the pressure.
reason 2,Tape and the spindle angle is not right. resolve method,adjust the angle.
fault 4,The mandrel and the frame for the paper tray stuck, tape core output blocked.
reason is core damage or not installed in the tray.
resolve method is change the paper core.
the above is common 4 faults when buyer operate the paper tube machine. you can read it
carefully and find the resolve method.
in fact, besides the above 4 faults, there is another common faults happened, I will
continue describe it carefully. if you are paper tube manufacturer and meet the problem
when operate the paper tube machine, it is lucky for you to reade our this file.
