STEPS FOR INSTALL PAPER TUBE MACHINE
STEPS FOR INSTALL PAPER TUBE MACHINE
when the customer get the new packed paper tube machine, normally they will ask how to install it? now I answer this question one by one.
1. when get the new packed paper tube machine,first install the paper tape in the steel pipe, into the left and right wooden trays, lock ring positioning. Then put them on the paper-shelf, pull out the end of the tape, both sides are optional, put on the upper and lower plastic tractions and through the fence section.
2. Let the paper tape file into the glue shelf and into the glue tank. Press the compression, so the paper tape steep in the glue. And use the drawknife in the tank to scrape the paper tape smooth.
3. The paper tape into the third stage. The positioning frame through the paper tube machine need idling 1 to 2 minutes before starting. First roll the outer and bottom of paper tape into the paper wrapping. Because the outer and bottom paper tapes do not coat with glue, then roll into other tapes, the thickness of layers according to the paper tubes.
4. Around the belt and the mandrel of the winding, paper tape into a spiral state, from a single tape slowly shaped into a paper tube.
5. The first belt is used to shape the paper tube. And the second belt is main used to compress and solid the paper tube
6. After the paper tube forming ,the paper tube machine itself can cut the tubes according to the length you set. The machine has function settings. You can set paper tube machine running conditions and any multi-point operation or remote control. Dual Infrared positioning the cutting process, the host automatic transmission automatic reply to make a more precise degree of incision formation, and performance is stable.
I will continue to update the file for install and test the paper tube machine.
